الله يعافيكم الي موجوده الحين اترجم لي ها المنتج/مخالف هناك موضوع مثبت خاص بالترجمة

انااشتريت ها المنتج لتلميع السيراميك بس للاسف كلالتعليمات با الانجليزي وانجليزيتي مهب ذاك الزود فا ياليت الي فاضيه الحين اترجم لي


Unglazed Ceramic Tile, Quarry Tile, Slate & Marble Floors
DIRECTIONS:



1_ Sweep floor clean of all dirt and dust



2_ For floors with an old finish - Apply Instant Wax Stripper (diluted 1 part stripper to 3 parts water, 1:1 for heavier jobs). Let stand 3 to 5 minutes, breakup wax with mop or nylon bristle brush and pickup solution with mop. Once all wax is removed from floor, rinse thoroughly with clean water. Old wax must be completely removed from the floor before the new wax can be applied. For floors without finish - Use Neutral Cleaner to thoroughly clean floor before applying finish. (Mix 2 oz. per gallon

3_Once floor is dry, apply two or three coats (depending upon desired gloss) of Stone & Tile Sealer Finish. Use either a cotton string or sponge mop. Allow 30 minutes drying time between coats




REGULAR MAINTENANCE

1_Damp mop with Neutral Cleaner (2 oz. per gallon) to remove the dirt but not the shine.



2_Reapply a coat of Stone & Tile Sealer Finish as necessary




Vinyl and "No Wax" Floors
Remember “No Wax” does not mean “No Maintenance.” As “No Wax” floors loose their surface gloss over time they will require a new coat of finish!