تعلمي كيف تخيطين فستان بسيط ....

جزاك الله خيرا
وتسلم ايدك

شكرا على مجهودك

عندى سؤال باترون الظهر عاوز توضيح

فين خط الظهر وفين حردة الابط والرقبه

رائع
يسلمو و و و و و يارب

مشكورين مروركم اسعدني :)


omesraa


الشرح عندي بالإنجليزي حاولت أترجمة لكن ماعرفت تطلع كلمات غير مترابطة

بس راح أنزل الشرح بالإنجليزي وجربي حظك في الترجمة



أتمنى يفيدك


You will need:

•2 ¾ yds. of fashion fabric, 45″ wide
•Coordinating thread
•60″ drawcord
•Kraft paper
PATTERN



Begin by taking a square sheet of paper and folding one corner to its opposite corner at 45 degrees.

On the folded edge, mark a point X. (see fig. 1)

FRONT WRAP

From X measure 10-inch intervals to a maximum of 60 inches.

Square a line across the paper at each point.

Divide the distance between X and 10″ mark is half. Square across.

On this line, measure 5″.

At the 20″ mark, measure 1/4 of hip measurement. Label this point A.

At the 30″ mark, measure 30″.

Join X to this point with a straight line passing through A.

Join the 60″ mark to this last point at the 30″ interval.

BACK WRAP

On the 10″ mark, measure 5″. Square down to the 20″ interval.

From this intersection, measure 10″. Label this point B.

Join the point at the 10″ interval to point B.

Square down from point B to the bottom line.

Cut the line at the 5″ interval.

Open the draft and trace onto a new sheet of paper. This is the FRONT.

Re-fold the draft and cut out the solid heavy line beginning at the 10″ interval. This is the BACK.

CUTTING (see diagram for cutting marker)


Cut front 1X

Cut back 1X

Cut along selvedge fabric strip for front ties. Cut in half (2 ties).

Cut along width of remaining fabric, 2 fabric strips for back ties.

Fabric tie strips = 3″ wide.

ASSEMBLY

On all edges press under 1/4″.

Turn all edges 1/2″ except for tops and stitch down. Miter at corners.

Along each top edge, turn under 1″ and stitch to create a casing.

Press under 1/4″ along the long edges of the fabric strips and one short edge.

Fold strip in half lengthwise with wrong sides together. Stitch along open edge. Press. Stitch along folded edge.

At notch A and B sew on a waist tie.

WEARING THE WRAP.

Insert drawcord through back casing and front casing to gather neckline. Tie over one shoulder and adjust the slack of the cord based on where the waist ties are positioned on the body.

Wrap back around body and tie in front.

Wrap front over back and crisscross tie straps around waist and draw fullness in close to body. Tie ends with a bow.

رفع