فكرة بتجنننننننننننننننن

رااااااااااااااااااوعه

تسلك ايدج وبحاول اطبقهااا ان شاء الله :26:

ما شاء الله يا لحظة عمر ..

حافظتك حلووووة .. مبرووك عليك..

وتسلم إيدك :26:

أنا شفت كمان حافظة على الإنترنت قلت يمكن تعجبكم :)





وطريقتها

Materials: About 3 ounces of worsted weight acrylic yarn

Crochet hook size H or size needed for gauge

Three buttons or three 2’ lengths of ribbon, depending on the closure you

choose.

Needle & thread to match yarn.


Gauge: 5 sc = about 1 1/2 “

5 rows of sc = about 1 1/2 “


Finished size will depend on the number of “pockets” to hold hooks or

needles.



Directions are for case that will hold 10” hooks or needles, and will be

worked on 50 stitches. Changes for case that will hold 14” hooks or needles

is in parenthesis, and will be worked on 62 stitches.



Ch 51 (63)


Row 1: Sc in the 2nd ch from hook and in each remaining ch across; ch 1,

turn.


Row 2: (Mark this as the right side.) Sc in each of the first 15 (21) sc, dc in

the back loops only of the next 20 sc, sc in each of the last 15 (21) sc; ch 1,

turn.


Row 3: Sc in each of the first 15 (21) sc, dc in the unworked loops only of

the next 20 sc on row 1, sc in each of the last 15 (21) sc; ch 1, turn.


Row 4: Sc in each of the first 15 (21) sc, sc through both thicknesses of the

next 20 dc to form a “pocket”, sc in each of the last 15 (21) sc; ch 1, turn.


Row 5: Sc in each sc across; ch 1, turn.


Rows 6-8: Repeat rows 2-4.


Additional “pockets”: Repeat rows 5-8 until you have the desired number of

hook “pockets” across your case. (I made mine with 8 hook pockets, so I

repeated rows 5-8 six times.) Fasten off after you have the desired number

of “pockets”.



Edging


With the right side facing you, fold the six stitches on either end toward the

center and pin in place.


Round 1: With wrong side facing you, attach yarn with a sc through both

thicknesses of any corner , sc in the same st, sc

along the side of the roll through both thicknesses of each of the next 5 sts,

sc in each of the next 26 (38) sts, sc through both thicknesses of the next 5

sts, 3 sc through both thicknesses of the next st; working along the end of

the roll, sc around the post of the sc along each row (along the fold);

continuing along the next side, 3 sc through both thicknesses of the next st,

sc through both thicknesses of each of the next 5 sts, sc in each of the next

26 (38) sts, sc through both thicknesses of the next 5 sts, 3 sc through both

thicknesses of the next st; working along the end of the roll, sc around the

post of the sc along each row (along the fold); sc through both thicknesses

of the same st as the first sc; join with a sl st to the first sc.


Work round 2 depending on the closure you choose.


Round 2 for button closure: Sl st in each sc around until you sl into the

center sc of the corner diagonally opposite of the first sl st; sl st in each of

the next 3 sc, ch 5 for button loop, sl st in each of the next 15 (21) sc, ch 5

for button loop; sl st in each of the next 15 (21) sc, ch 5 for button loop;

continue working a sl st in each sc around; join with a sl st to the first sl st.

Fasten off. Weave in ends.


Round 2 for ribbon closure: Sl st in each sc around; join with a sl st to the

first sl st. Fasten off. Weave in ends.



Finishing


Button closure

Place hooks or needles in the “pockets”. Roll the case, beginning on the

opposite side from the button loops. Mark the placement for the buttons.

Sew buttons in place. Push buttons through loops to close the roll.


Ribbon closure

Place hooks or needles in the “pockets”. Roll the case to close. Pin the center

of each of the three pieces of ribbon (evenly spaced along the length of the

roll) to the outside of the roll, opposite the exposed open end of the roll.

Sew each ribbon in place where pinned. Wrap both ends of each ribbon to

the front of the case and tie in a bow.

ودي كمان



ودي كمان



Crocheter's Take-Along Tool Kit

by Priscilla Hewitt

Copyright©2001 The Crochet Cottage


Difficulty level:***(average)

Materials

Red Heart Super Saver worsted weight acrylic yarn, crochet hook size F (3.75 mm) or the size needed to achieve gauge, two safety pins (one large, one small)


Gauge: Rows 1-2 = 7 3/4" x 3/4"



Inner Lining


Ch 30


Row 1: Sc in the 2nd ch from hook and in the top loop only of each remaining ch across; ch 1, turn. (29 sc)


Row 2: Sc in each sc across; ch 1, turn. (29 sc) Check gauge.


Row 3: Sc in the front loop only of each of the first 3 sc, ch 23, skip the next 23 sc, sc in the front loop only of each of the last 3 sc; ch 1, turn. (6 sc and 23 ch)


Row 4: Sc in each of the first 3 sc, sc in each of the next 23 ch's, sc in each of the last 3 sc; ch 2, turn. (29 sc) (Pattern note: the ch sts at the ends of the rows do not count as the first st on the next row.)


Pattern note: Rows 5-8 form 2 pockets sized to hold 2 steel hooks


Row 5: Hdc in each of the first 14 sts, hdc in the back loop only of each of the last 15 sts; turn, hdc in each of the unworked loops on the last 15 hdc; ch 1, turn, sc through both thicknesses of each of the 15 hdc to close the pocket; ch 1, turn. (59 sts)


Row 6: Sc in each of the first 15 sc, dc in each of the last 14 hdc; ch 2, turn. (29 sts)


Rows 7-8: Repeat rows 5-6


Pattern note: Rows 9-14 form 3 pockets sized to hold 2 aluminum hooks and a pencil (or 3 aluminum hooks)


Row 9: Dc in each of the first 14 sts, dc in the back loop only of each of the last 15 sts; turn, dc in each of the unworked loops on the last 15 dc; ch 1, turn, sc through both thicknesses of each of the 15 dc to close the pocket; ch 1, turn. (59 sts)


Row 10: Sc in each of the first 15 sc, dc in each of the last 14 dc; ch 2, turn. (30 sts)


Rows 11-14: (Repeat rows 9-10) 2 times, working a "ch 1, turn" at the end of row 10 instead of a "ch 2, turn."


Row 15: Sc in each st across; ch 1, turn. (29 sc)


Row 16: Sc in the back loop only of each sc across; ch 1, turn. (29 sc) Mark the unworked front loop of the last stitch with the large safety pin.


Rows 17-19: Sc in each sc across; ch 1, turn. (29 sc)


Row 20: Sc in the back loop only of each sc across; ch 1, turn. (29 sc) Mark the unworked front loop of the last stitch with the small safety pin.


Row 21: Sc in each sc across; ch 1, turn. (29 sc)


Row 22: Sc in each sc across; ch 3, turn. (29 sc)


Pattern note: Rows 23-26 forms one pocket sized to hold a 6" ruler


Row 23: Trc in each of the first 14 sts, trc in the back loop only of each of the next 15 sts; turn, trc in each of the unworked loops on the last 15 trc; ch 3, turn. (44 trc)


Row 24: Trc in each of the 44 trc on row 23; ch 1, turn. (44 trc)


Row 26: Sc in each of the first 14 trc, sc through both thicknesses of the next 15 trc to close the pocket; ch 1, turn. (29 sc)


Row 27: Sc in each sc across; ch 1, turn. (29 sc)


Pattern note: Rows 28-29 forms one pocket sized to hold a large yarn needle


Row 28: Sc in each of the first 19 sts, sc in the back loop only of each of the next 10 sts; turn, sc in each of the unworked loops on the last 10 sc; ch 1, turn, sc through both thicknesses of each of the 10 sc to close ; ch 1, turn. (49 sts)


Row 29: Sc in each of the first 10 sc, dc in each of the last 19 sc; ch 3, turn. (29 sts)


Pattern note: Rows 30-31 forms one pocket sized to hold a 4" scissors


Row 30: Trc in each of the first 17 sts, trc in the back loop only of each of the next 12 sts; turn, trc in each of the unworked loops on the last 12 trc; ch 1, turn, sc through both thicknesses of each of the 12 trc to close the pocket; ch 1, turn. (53 sts)


Row 31: Sc in each of the first 12 sc, dc in each of the last 17 trc; ch 1, turn. (29 sts)


Rows 32-33: Sc in each st across; ch 1, turn. (29 sc)


Row 34: Sc in the front loop only of each of the first 3 sc, ch 23, skip the next 23 sc, sc in the back loop only of each of the last 3 sc; ch 1, turn. (6 sc and 23 ch)


Row 35: Sc in each of the first 3 sc, sc in each of the next 23 ch's, sc in each of the last 3 sc; ch 1, turn. (29 sc)


Row 36: Sc in each sc across; ch 1, turn. (29 sc)




Outer Cover (first side)


Row 37: Sc in the front loop only of each sc across; ch 1, turn. (29 sc)


Row 38: Sc in each sc across; ch 1, turn. (29 sc)


Row 39: Insert hook into the first unworked loop on row 34 and into the first sc on row 38; complete a sc, (insert hook into the next unworked loop on row 34 and into the next sc on row 38; complete a sc) 2 times, sc in each of the next 23 sc on row 38, (insert hook into the next unworked loop on row 34 and into the next sc on row 38; complete a sc) 3 times; ch 1, turn. (29 sc)


Rows 40-59: Sc in each sc across; ch 1, turn. (29 sc)


Row 60: Insert hook in the first sc on row 59 and into the first unworked loop on row 20 (marked with the small safety pin); complete a sc, (insert hook in the next sc on row 59 and into the next unworked loop on row 20; complete a sc) 28 times; ch 1, turn. (29 sc)


Rows 61-63: Sc in each sc across; ch 1, turn. (29 sc)


Row 64: Insert hook in the first sc on row 63 and into the first unworked loop on row 16 (marked with the large safety pin); complete a sc, (insert hook in the next sc on row 63 and into the next unworked loop on row 16; complete a sc) 28 times; ch 1, turn. (29 sc)


Rows 65- 84: Sc in each sc across; ch 1, turn. (29 sc)


Row 85: Insert hook into the first unworked loop on row 3 and into the first sc on row 84; complete a sc, (insert hook into the next unworked loop on row 3 and into the next sc on row 84; complete a sc) 2 times, sc in each of the next 23 sc on row 84, (insert hook into the next unworked loop on row 3 and into the next sc on row 84; complete a sc) 3 times; ch 1, turn. (29 sc)


Row 86: Sc in each sc across; ch 1, turn. (29 sc)


Row 87: Insert hook in the first loop on the foundation ch of row 1 and into the first sc on row 86; complete sc, (insert hook in next loop on the foundation ch of row 1 and into the next sc on row 86; complete sc) 28 times; turn. (29 sc)


Edging: Sl st in each of the 29 sc on row 87, working along the bottom of the case through the outer case and into the inner lining to close the bottom, work 50 sc in the ends of each row of the outer case across, sl st in each of the unworked loops on row 37, working along the top of the case through the outer case and into the inner lining to close the top, work 50 sc in the ends of each row of the outer case across; join with a sl st in the first sl st. Fasten off. Weave in ends.



Finishing 0ptions


1. Close the case and measure around the three open sides to determine the length of zipper needed. Sew zipper around the three open sides.


2. Sew velcro around the open sides of the case.


3. Crochet a flap closing with buttonhole as done for the Paperback Totes. Sew a button to the case and add the handles if desired.


4. Crochet a cord and sew to each side to tie closed.


5. Sew a ribbon to each side to tie closed.


6. Sew a heavy snap to the inside edge to close.

وكمان



وطريقتها

Crochet Hook Caddy
by Priscilla Hewitt

Copyright© 2001, Priscilla’s Crochet


Difficulty level: ***(average)


I crochet at my computer desk (don't we all?) and needed a better way to store the hooks I like to keep handy. I was keeping them in a pencil cup, and always had to remove all the hooks to find the one I wanted. This hook caddy has a coiled inner section that keeps the hooks separate for quick access...just insert the hooks between the coils!




Materials

About 4 ounces of a stiffer worsted weight acrylic, like Red Heart

Crochet hook size G (4 mm) or size needed to achieve gauge

Cardboard crochet thread core measuring about 3 1/2" in diameter x 3 1/2" high (I used the core from a ball of Aunt Lydia’s "Denim" Quick Crochet)

Gauge: Rounds 1-3 of the inner section = about 2"

Finished size: About 3 3/4" in diameter x 4" high


Inner (coiled) section

Ch 4, join with a sl st in the first ch to form a ring.

Round 1: Work 6 sc in the ring. (6 sc) Do not join. Instead, use a stitch marker to mark the first stitch in rounds 2-6.

Round 2: Work 2 sc in the back loop only of each sc around. (12 sc)

Round 3: (Sc in the back loop only of the first sc, 2 sc in the back loop only of the next sc) 6 times. (18 sc)

Round 4: (Sc in the back loop only of each of the next 2 sc, 2 sc in the back loop only of the next sc) 6 times. (24 sc)

Round 5: (Sc in the back loop only of each of the next 3 sc, 2 sc in the back loop only of the next sc) 6 times. (30 sc)

Round 6: (Sc in the back loop only of each of the next 4 sc, 2 sc in the back loop only of the next sc) 6 times; ch 2, turn. (36 sc) (Pattern note: The "ch 2" at the end of the rows does not count as the first dc in the next row.)


Pattern note: After round 6, the pattern will be worked in spiral rows. Work tightly for best results.

Row 1: Dc in the back loop only of each of the first 36 sc, dc in each of the 90 unworked loops in rounds 5, 4, 3, 2, and 1; ch 2, turn. (126 dc)

Rows 2-6: Dc through both loops of each dc across; ch 2, turn. (126 dc)

Row 7: Dc through both loops of each dc across. (126 dc) Fasten off.


Outer cover

Ch 4, join with a sl st in the first ch to form a ring.

Round 1: Work 6 sc in the ring. (6 sc) Do not join. Instead, use a stitch marker to mark the first stitch in rounds 2-6.

Round 2: Work 2 sc in each sc around. (12 sc)

Round 3: (Sc in the first sc, 2 sc in the next sc) 6 times. (18 sc)

Round 4: (Sc in the each of next 2 sc, 2 sc in the next sc) 6 times. (24 sc)

Round 5: (Sc in each next 3 sc, 2 sc in the next sc) 6 times. (30 sc)

Round 6: (Sc in each of the next 4 sc, 2 sc in the next sc) 6 times; ch 2, turn. (36 sc)

Round 7 (joining to the bottom of the inner section): Insert hook in the back loop only of the next sc and into the first skipped front loop of round 6 of the inner section and complete a sc, (insert hook in the back loop only of the next sc and into the next skipped front loop of round 6 of the inner section and complete a sc) 35 times. (36 sc)

Rounds 8-23: Leaving the inner section hanging from the bottom of the piece, sc through both loops of each sc around. (36 sc) Fasten off after round 23.


Finishing

Turn outer cover right side out to enclose the inner section. Insert the cardboard core between the inner and outer sections. Straighten outer cover over the cardboard core.

Row 1: With yarn on hook, insert hook into the stitch on the outer cover closest to the first stitch on row 7 of the inner cover, then insert hook into the first stitch on row 7 of the inner section and complete a sc, (insert hook into the next st on the outer cover and into the next st on the inner section and complete a sc) 35 times to enclose the cardboard core; continue working a sc in each of the next 90 sts on the inner section; ch 1, turn. (126 sc)

Row 2: Sl st in each of the first 90 sts on the inner section, then continue working a sl st in each of the next 36 sc around the top perimeter of the caddy; join with a sl st in the first sl st at the top of the caddy. Fasten off. Weave in ends.

:)

شكرا يا هبه على المرور

*********************************************
أسيرة موني ننتظر تطبيقك



**********************************************
عفريته مشكورة على الإضافة

اللي يريد باترونات للحافظة يوجد اضافات للأخت ياسمينه أعلاه جزاها الله كل الخير