قبعات تريكو بالباترون

SIZE
0-3 months

FINISHED MEASUREMENTS
Head Circumference: 14.5 inches

MATERIALS

Debbie Bliss Cashmerino Aran ; color: soft pink #603; 1 skeins.

1 16 inch US #6/4mm circular needle
1 set US # 6/4mm double-point needles
Stitch marker
Tapestry needle
Two half inch matching buttons without shanks
Sewing needle and thread

GAUGE
20 sts/28 rows = 4" in stockinette stitch


STITCH PATTERNS


Knitted Cast-on
Place slip knot on left needle. Insert right needle into loop, wrap yarn and draw through as if to knit but do not remove slip knot from needle. Place new stitch onto left needle. *Insert right needle into last stitch made on left needle. Wrap yarn and draw through as if to knit but do not remove stitch from left needle. Place new stitch on left needle. Repeat from * for knitted cast-on.

Picot Cast-on
Using Knitted Cast-on, *CO 5 sts, BO 2 sts, slip st rem on right needle back to left needle, repeat from * for Picot Cast-on.


DIRECTIONS
Brim
Using circular needle and Picot Cast-on, CO 125 sts. Place marker and join to begin working in the round, being careful not to twist.

First, Second and Fourth Sizes only:
Round 1: to last st, k1.
Round 2: to last st, p1.

Third and Fifth Sizes only:
Round 1: around.
Round 2: around.

All Sizes:
Work in stockinette st for .75 inches.

Bobble Border
Round 1: to last 4 sts, k2, k2tog. 69 sts rem.
Round 2: K all sts, decreasing 0 stitches evenly spaced around. 69sts rem.
Round 3: around. 138 sts.
Round 4: around. 69sts rem.
Cont in stockinette st until work measures 1.5 inches from beg of Bobble Border. Dec 4 st(s) evenly spaced in last row. 65 sts rem.

Crown
(Change to dpns when necessary)
Next Round: *K11, k2tog, place marker, rep from * around.
You should now have 5 markers on the needle, with 12 sts between each.

Round 1: K all sts.
Round 2: around.
Repeat Rounds 1 and 2 until 7 sts remain between markers. 35 sts
K 1 round.
Work Round 2 until 1 st rem between markers. 5 sts
Cut yarn, thread through rem sts and pull tight.

Earflaps (make 2)
CO 6 sts.
Row 1 : across.
Row 2 : (K1, p1) in first st, k1, p1, YO, p2tog, (k1, p1) in last st. 8 sts.
Row 3 : across.
Row 4 : (P1, k1) in first st, to last st, (p1, k1) in last st. 10 sts.
Row 5 : across.
Row 6 : (K1, p1) in first st, to last st, (k1, p1) in last st. 12 sts.

Fourth and Fifth Sizes Only:
Row 7 : across.
Row 8 : (P1, k1) in first st, to last st, (p1, k1) in last st. 14 sts.
Row 9 : across.
Row 10 : (K1, p1) in first st, across, (k1, p1) in last st. 16 sts.

All Sizes:
Next Row : across.
Next Row : across.
Repeat last 2 rows until work measures 2.25 inches.
BO all sts in patt.

Ties (make 2)
CO 2sts.
Row 1: K1, p1
Row 2: P1, k1
Repeat these 2 rows until tie measures 11 inches.
BO in pattern.

FINISHING
Attach earflaps on opposite sides of hat by sewing them under the brim and onto the back sides of the bobbles. Be sure that the wrong side of the hat and the right side of the earflap are facing as you sew.

Sew ties onto center right side of earflap at the point that it meets the brim.

Sew buttons on inside of hat so that they match up with YOs from earflaps when flaps are folded up inside hat.

Weave in all ends.

Thread ties through YOs in earflaps to wear them down, or button flaps up if it's not so cold!

Everything about this hat reminds me of a crisp spring day in Odessa: the color – a carbon copy of blooming lilac blossoms all over the city, the swirling lines – reminiscent of the sun poking through the clouds, the pearly beads – people’s smiles and sparking eyes greeting the coming summer months.

The Odessa hat is a satisfying project – knit entirely in the round and requiring only one skein of Rowan Cashsoft DK, there is minimal finishing and immediate wearability. The natural stretchiness of the yarn and pattern allow the hat to cover a range of head sizes – from 20” / 51 cm (large child) to 23” / 58 cm (large adult). The beads are a wonderful detail, although it’s important to point out that they are a choking hazard; please use your judgment. Omitting the beads and choosing an appropriate yarn color will most certainly please masculine Odessa admirers, too.

Difficulty level
Intermediate

Size
16.75” / 42.5cm in circumference and 7.5” / 19cm in depth unstretched; to fit heads 20” / 51cm (large child) to 23” / 58cm (large adult) in circumference.

Materials
Rowan Cashsoft DK (57% extra fine merino, 33% microfibre, 10% cashmere, 142 yd / 130m per 50g ball): 1 ball Bella Donna 502.
Size 6 pearl-colored beads: approximately 150 (modeled hat uses 110).

US 4 (3.5 mm) 16" / 40cm circular needle
US 6 (4 mm) 16” / 40cm circular needle
US 6 (4 mm) double-pointed needles

tapestry needle
stitch marker

Gauge
26 sts and 33 rows = 4” / 10cm in hat pattern knit circularly.

Abbreviations
BK1 – knit a bead into a stitch. Insert the needle into the stitch to be knit as usual, slide a bead close to the needle, and pull the bead through to the front as you complete the stitch. The bead should sit on the right leg of the knit stitch “V.”

Odessa hat pattern
Plain round: *ssk, k6, yo, k2, repeat from * until the end of round.
Beaded round: *ssk, k3, BK1, k2, yo, k2, repeat from * until the end of round.
Pattern
Before you begin, string 150 beads onto the yarn. As you knit, gently move them towards the other end of the ball as needed.

Using US 4 (3.5 mm) circular needle, cast on 110 sts. Join into round, being careful not to twist stitches. K3, p2 all the way around until work measures 1” / 2.5 cm from cast-on edge. K2 sts and place marker. The marker (not the tail of the yarn) is the beginning of all future rounds. Switch to US 6 (4 mm) needles. Begin Odessa hat pattern: work 2 plain rounds, *1 beaded round, 3 plain rounds, repeat from * until work measures 5.5” / 14 cm from cast-on edge.

Begin hat decreases (switch to double-pointed needles when there are too few stitches to stretch around the circular needle). Repeat each line of instructions for the entirety of one round.

1. ssk, k4, BK1, k1, yo, k2 (110 sts remain)
2. (sl1, k2tog, psso), k5, yo, k2 (99)
3. ssk, k5, yo, k2
4. sl1, k2tog, psso, k4, yo, k2 (88)
5. ssk, k3, BK1, yo, k2
6. (sl1, k2tog, psso), k3, yo, k2 (77)
7. ssk, k3, yo, k2
8. (sl1, k2tog, psso), k2, yo, k2 (66)
9. ssk, k2, yo, k2
10. (sl1, k2tog, psso), k1, yo, k2 (55)
11. ssk, k1, yo, k2
12. (sl1, k2tog, psso), yo, k2 (44)
13. ssk, k2 (33)
14. ssk, k1 (22)
15. ssk (11)

Cut yarn, leaving a tail. Thread the tail through the remaining 11 stitches, pull the hole closed and weave the tail on the inside of the hat.

Scallop Brim Instant Hat
Materials
approx 70 yds bulky thick and thin yarn
Note: Unless yarn varies from thick to thin, brim will not scallop
16" circular #13 OR #11 needles
(or the size you need to match 2½ sts=1" gauge)
stitch marker
tapestry needle

Size: 23"-25"

Gauge
2½ sts = 1"
If you want your hat to fit,
make a swatch and check your gauge!

Terms Used:
k knit
k2tog knit 2 together
rnd round
st(s) stitch(es)

Directions
Cast on 61 sts. Being careful not to twist sts, slip the first cast-on st onto the left hand needle, so it sits next to the last st. Knit these two sts together. Pull yarn firmly to prevent a gap, then place a marker to mark the beginning of the round. (On each round, when you come to the marker just slip it to the right needle and keep knitting.)
Knit around and around until hat measures 9" from beginning, then work decrease rounds:

Decrease Rounds
*K10, k2tog. Repeat from * around hat. This will leave 55 sts on needle.
*K9, k2tog. Repeat from * around hat. This will leave 50 sts on needle.
*K8, k2tog. Repeat from * around hat. This will leave 45 sts on needle.
*K2tog. Repeat from * to last st, k1. This will leave 23 sts on needle.
Cut yarn leaving 8" tail. Thread tail onto tapestry needle and run it through the remaining sts. Pull to close hole, then secure yarn, cut yarn and weave in yarn end.

SIZE
One size fits average-to-large adult head

FINISHED MEASUREMENTS
Circumference: approx. 24 inches


MATERIALS

These hats were made using leftover balls of acrylic yarn in my stash. Any worsted weight acrylic yarn will work great. If you're using leftovers for a two-color hat, you will need approximately 150 yds/135m (single strand) of each color.

Suggested materials:
Red Heart Super Saver
Cherry Red #319; 1 skein
White #311; 1 skein

1 set US #9/5.5mm straight needles
Tapestry needle


GAUGE
15 sts/28 rows = 4 inches in garter stitch

PATTERN NOTES

pic 1^

pic 2^


Each time you change colors, bring the new color to the front and over the old color to create a neat, consistent border along the bottom edge of the hat. Add more colors for a more creative colorway.

Unlike many patterns that use short rows, it is not necessary to wrap the yarn around the stitch at the turning point when working these short rows. When it is time to turn the work around and work back in the other direction, the instructions will simply say "turn".

The longtail cast on is used for this pattern. If you are unfamiliar with this technique, excellent instructions can be found here.

This pattern is worked with two strands of yarn held together throughout.

DIRECTIONS



Using the long-tail cast on method and two strands of MC, CO 38 sts.
*Using CC, k36, turn. K to end.

Using MC, k34, turn. K to end.

Using CC, k32, turn. K to end.

Using MC, k30, turn. K to end.

Using CC, k28, turn. K to end.

Using MC, k26, turn. K to end.

Using CC, k24, turn. K to end.

Using MC, k22, turn. K to end.

Using CC, k20, turn. K to end.

Half a wedge has been completed.


Using MC, k22, turn. K to end.

Using CC, k24, turn. K to end.

Using MC, k26, turn. K to end.

Using CC, k28, turn. K to end.

Using MC, k30, turn. K to end.

Using CC, k32, turn. K to end.

Using MC, k34, turn. K to end.

Using CC, k36, turn. K to end.

Using MC, k 2 rows across all sts.*

One complete wedge has been worked.

Repeat from * to * 4 times more.

Using MC, BO all sts. Break yarn, leaving a 24-inch tail.

FINISHING

Thread yarn tail on tapestry needle. Draw yarn through top point of each wedge and pull tight.

قبعات جميله يا راجيه
عجبتني البني في بيج