28-
Ch 4, join to form a ring
Round 1: Ch 3, 2 dc in ring, (ch 3, 3 dc in ring) 3 times, ch 1, join with hdc in 3rd ch of beg ch 3 to make corner
Round 2: Ch 3, dc around hdc, Repeat 2 more times, and * to * once more, then 2 dc in corner, ch 1, join with hdc in 3rd ch of beg ch 3 to make corner
Round 3: Ch 3, dc around hdc, twice, and * to * once more, then 2 dc in corner, ch 1, hdc in 3rd ch of beg ch 3 to make corner
Round 4: Ch 3, dc around hdc, Repeat 2 more times, and * to * once more, then 2 dc in corner, ch 1, join with hdc in 3rd ch of beg ch 3 to make corner
Round 5: Ch 3, dc around hdc, twice, and * to * once more, then 2 dc in corner, ch 1, hdc in 3rd ch of beg ch 3 to make corner
Round 6: Repeat Round 4
Round 7: Ch 3, dc around hdc, twice, and * to * once more, then 2 dc in corner, ch 1, hdc in 3rd ch of beg ch 3 to make corner
Round 8: Repeat Round 4
Round 9: Ch 3, dc around hdc, twice, and * to * once more, then 2 dc in corner, ch 1, hdc in 3rd ch of beg ch 3 to make corner
Round 10: Repeat Round 4, finish off.
29-
With CA, ch 5, join with sl st in first ch to form ring.
.
Rnd 1: ch 3 (counts as first dc now and throughout), 15 dc in ring, join with sl st in top of beg ch-3. (16 dc)
.
Rnd 2: ch 1, sc in same st as joining, *5 dc in next dc**, sc in next sc*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (40 dc, 8 sc)
.
Rnd 3: ch 1, working Behind sts of Rnd 2, BPsc in first sc, ch 3, (BPsc in next sc, ch 3) around, join with sl st in top of first BPsc. (8 BPsc, 8 ch-3 sps)
.
Rnd 4: ch 1, working into sts of Rnd 2, sl st in first sc, *ch 1, (hdc in next dc, ch 1) 5 times**, sl st in next sc*, rep from * to * around ending last rep at **, join with sl st into first sl st. Fasten Off. (40 hdc, 8 sl sts)
.
Rnd 5: join CB with sc in any ch-3 lp of Rnd 3, (ch 5, sc in next ch-3 lp) around, ch 2, dc in top of first sc to join and form last ch-5 lp. (8 sc, 8 ch-5 lps)
.
Rnd 6: ch 1, sc in lp just made, (ch 6, sc in next ch-5 lp) around, ch 3, dc in top of first sc to join and form last ch-6 lp. (8 sc, 8 ch-6 lps)
.
Rnd 7: ch 1, sc in lp just made, *work plp**, (sc, ch 3, sc) in next ch-6 lp*, rep from * to * around ending last rep at **, sc in same lp as first sc, dc in first sc to join and form last ch-3 lp. (16 sc, 8 plp, 8 ch-3 lps)
.
Rnd 8: ch 4, dc in lp just made (counts as beg V-st), ch 8, (V-st in next ch-3 lp, ch 8) around, join with sl st in 3rd ch of beg ch-4. Fasten Off. (8 V-sts, 8 ch-8 lps)
.
Note: Weave in and secure ends now as it will be difficult to do so after the Overlay is attached to the Background Square.
.
.
Background Square
.
With MC, ch 5, join with sl st in first ch to form ring.
.
Rnd 1: ch 3 (counts as first dc now and throughout), 15 dc in ring, join with sl st in top of beg ch-3. (16 dc)
.
Rnd 2: ch 4 (counts as first dc and 1 ch), (dc in next dc, ch 1) around, join with sl st in 3rd ch of beg ch-4. (16 dc, 16 ch-1 sps)
.
Rnd 3: ch 5 (counts as first dc and 2 ch), (dc in next dc, ch 2) around, join with sl st in 3rd ch of beg ch-5. (16 dc, 16 ch-2 sps)
.
Rnd 4: ch 3, *3 dc in next ch-2 sp**, dc in next dc*, rep from * to * around ending last rep at **, join with sl st in top of beg ch-3. (64 dc)
.
Rnd 5: ch 3, dc in same st as joining, *sk next dc, 3 dc in next dc, sk next dc**, 2 dc in next dc*, rep from * to * around ending last rep at **, join with sl st in top of beg ch-3. (80 dc)
.
Rnd 6: ch 1, sc in same st as joining and in each dc around, join with sl st in top of first sc. (80 sc)
.
Note: You will be attaching the Overlay on Rnd 7. To do this, hold the Overlay in Front of the Background Square with the Wrong Side of Overlay facing the square - in other words, both pieces will have the Right Sides facing you and the Overlay will be on top of the square. Attaching is done as follows: insert hook through ch-8 lp on Rnd 8 of Overlay and into next sc on Rnd 6 of Square, work a sc through both pieces.
.
Rnd 7: ch 1, 2 sc in same st as joining, *sc in each of next 4 sc, attach to 1 Overlay lp, sc in each of next 4 sc**, 2 sc in next sc*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (88 sc)
.
Rnd 8: ch 1, sc in same st as joining, *ch 3, sk next 4 sc, (2 tr, dtr) in next sc, 3 dtr in next sc, (dtr, 2 tr) in next sc, ch 3, sk next 4 sc, (sc in next sc, ch 1, sk next sc) 5 times**, sc in next sc*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (24 sc, 20 ch-1 sps, 20 dtr, 16 tr, 8 ch-3 sps)
.
Rnd 9: sl st into ch-3 sp, (ch 1, sc) in same sp, *ch 3, sk next tr, sc in next tr, ch 3, sk next 2 dtr, (sc, ch 3, sc) in next dtr (corner lp made), ch 3, sk next 2 dtr, sc in next tr, ch 3, sk next tr, sc in next ch-3 sp, ch 3, sc in next ch-1 sp, (ch 3, sk next ch-1 sp, sc in next ch-1 sp) 2 times, ch 3**, sc in next ch-3 sp*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (36 sc, 36 ch-3 lps)
.
Rnd 10: sl st into ch-3 lp, (ch 3, dc) in same lp, ch 1, 2 dc in next ch-3 lp, ch 1, *(3 dc, ch 2, 3 dc) in next ch-3 corner lp, ch 1**, (2 dc in next ch-3 lp, ch 1) 8 times*, rep from * to * around ending last rep at **, (2 dc in next ch-3 lp, ch 1) 6 times, join with sl st in top of beg ch-3. (88 dc, 36 ch-1 sps, 4 ch-2 corner sps)
.
Rnd 11: sl st in next dc and into next ch-1 sp, (ch 3, dc) in same sp, ch 1, 2 dc in next ch-1 sp, ch 1, *(3 dc, ch 2, 3 dc) in next ch-2 corner sp, ch 1**, (2 dc in next ch-1 sp, ch 1) 9 times*, rep from * to * around ending last rep at **, (2 dc in next ch-1 sp, ch 1) 7 times, join with sl st in top of beg ch-3. Fasten Off. (96 dc, 40 ch-1 sps, 4 ch-2 corner sps)
.
Rnd 12: join CA with sc in any ch-2 corner sp, 2 sc in same sp, sc in each dc and each ch-1 sp around with 3 sc in each corner ch-2 sp, join with sl st in top of first sc. Fasten Off. Weave in ends. (148 sc)
.
Note: If you prefer, you can use the Hidden Ends technique (Click Here) instead of ending Rnd 12 with a sl st.
.
With CA, ch 5, join with sl st in first ch to form ring.
.
Rnd 1: ch 3 (counts as first dc now and throughout), 15 dc in ring, join with sl st in top of beg ch-3. (16 dc)
.
Rnd 2: ch 1, sc in same st as joining, *5 dc in next dc**, sc in next sc*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (40 dc, 8 sc)
.
Rnd 3: ch 1, working Behind sts of Rnd 2, BPsc in first sc, ch 3, (BPsc in next sc, ch 3) around, join with sl st in top of first BPsc. (8 BPsc, 8 ch-3 sps)
.
Rnd 4: ch 1, working into sts of Rnd 2, sl st in first sc, *ch 1, (hdc in next dc, ch 1) 5 times**, sl st in next sc*, rep from * to * around ending last rep at **, join with sl st into first sl st. Fasten Off. (40 hdc, 8 sl sts)
.
Rnd 5: join CB with sc in any ch-3 lp of Rnd 3, (ch 5, sc in next ch-3 lp) around, ch 2, dc in top of first sc to join and form last ch-5 lp. (8 sc, 8 ch-5 lps)
.
Rnd 6: ch 1, sc in lp just made, (ch 6, sc in next ch-5 lp) around, ch 3, dc in top of first sc to join and form last ch-6 lp. (8 sc, 8 ch-6 lps)
.
Rnd 7: ch 1, sc in lp just made, *work plp**, (sc, ch 3, sc) in next ch-6 lp*, rep from * to * around ending last rep at **, sc in same lp as first sc, dc in first sc to join and form last ch-3 lp. (16 sc, 8 plp, 8 ch-3 lps)
.
Rnd 8: ch 4, dc in lp just made (counts as beg V-st), ch 8, (V-st in next ch-3 lp, ch 8) around, join with sl st in 3rd ch of beg ch-4. Fasten Off. (8 V-sts, 8 ch-8 lps)
.
Note: Weave in and secure ends now as it will be difficult to do so after the Overlay is attached to the Background Square.
.
.
Background Square
.
With MC, ch 5, join with sl st in first ch to form ring.
.
Rnd 1: ch 3 (counts as first dc now and throughout), 15 dc in ring, join with sl st in top of beg ch-3. (16 dc)
.
Rnd 2: ch 4 (counts as first dc and 1 ch), (dc in next dc, ch 1) around, join with sl st in 3rd ch of beg ch-4. (16 dc, 16 ch-1 sps)
.
Rnd 3: ch 5 (counts as first dc and 2 ch), (dc in next dc, ch 2) around, join with sl st in 3rd ch of beg ch-5. (16 dc, 16 ch-2 sps)
.
Rnd 4: ch 3, *3 dc in next ch-2 sp**, dc in next dc*, rep from * to * around ending last rep at **, join with sl st in top of beg ch-3. (64 dc)
.
Rnd 5: ch 3, dc in same st as joining, *sk next dc, 3 dc in next dc, sk next dc**, 2 dc in next dc*, rep from * to * around ending last rep at **, join with sl st in top of beg ch-3. (80 dc)
.
Rnd 6: ch 1, sc in same st as joining and in each dc around, join with sl st in top of first sc. (80 sc)
.
Note: You will be attaching the Overlay on Rnd 7. To do this, hold the Overlay in Front of the Background Square with the Wrong Side of Overlay facing the square - in other words, both pieces will have the Right Sides facing you and the Overlay will be on top of the square. Attaching is done as follows: insert hook through ch-8 lp on Rnd 8 of Overlay and into next sc on Rnd 6 of Square, work a sc through both pieces.
.
Rnd 7: ch 1, 2 sc in same st as joining, *sc in each of next 4 sc, attach to 1 Overlay lp, sc in each of next 4 sc**, 2 sc in next sc*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (88 sc)
.
Rnd 8: ch 1, sc in same st as joining, *ch 3, sk next 4 sc, (2 tr, dtr) in next sc, 3 dtr in next sc, (dtr, 2 tr) in next sc, ch 3, sk next 4 sc, (sc in next sc, ch 1, sk next sc) 5 times**, sc in next sc*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (24 sc, 20 ch-1 sps, 20 dtr, 16 tr, 8 ch-3 sps)
.
Rnd 9: sl st into ch-3 sp, (ch 1, sc) in same sp, *ch 3, sk next tr, sc in next tr, ch 3, sk next 2 dtr, (sc, ch 3, sc) in next dtr (corner lp made), ch 3, sk next 2 dtr, sc in next tr, ch 3, sk next tr, sc in next ch-3 sp, ch 3, sc in next ch-1 sp, (ch 3, sk next ch-1 sp, sc in next ch-1 sp) 2 times, ch 3**, sc in next ch-3 sp*, rep from * to * around ending last rep at **, join with sl st in top of first sc. (36 sc, 36 ch-3 lps)
.
Rnd 10: sl st into ch-3 lp, (ch 3, dc) in same lp, ch 1, 2 dc in next ch-3 lp, ch 1, *(3 dc, ch 2, 3 dc) in next ch-3 corner lp, ch 1**, (2 dc in next ch-3 lp, ch 1) 8 times*, rep from * to * around ending last rep at **, (2 dc in next ch-3 lp, ch 1) 6 times, join with sl st in top of beg ch-3. (88 dc, 36 ch-1 sps, 4 ch-2 corner sps)
.
Rnd 11: sl st in next dc and into next ch-1 sp, (ch 3, dc) in same sp, ch 1, 2 dc in next ch-1 sp, ch 1, *(3 dc, ch 2, 3 dc) in next ch-2 corner sp, ch 1**, (2 dc in next ch-1 sp, ch 1) 9 times*, rep from * to * around ending last rep at **, (2 dc in next ch-1 sp, ch 1) 7 times, join with sl st in top of beg ch-3. Fasten Off. (96 dc, 40 ch-1 sps, 4 ch-2 corner sps)
.
Rnd 12: join CA with sc in any ch-2 corner sp, 2 sc in same sp, sc in each dc and each ch-1 sp around with 3 sc in each corner ch-2 sp, join with sl st in top of first sc. Fasten Off. Weave in ends. (148 sc)
.
Note: If you prefer, you can use the Hidden Ends technique (Click Here) instead of ending Rnd 12 with a sl st.
.
30 -
Rnd 1: Ch 3, 2 dc in ring, (ch 2, 3dc in ring) four times, ch 2. Join with sl st in top of beginning ch 3.
Rnd 2: Sl st in next dc. Ch 4, (tr, ch 3, tr, ch 1, dc) in same st, * ch 1, sc in next ch 2 sp, ch 1, sk next dc, (dc, ch 1, tr, ch 3, tr, ch 1, dc) in next dc. Repeat from * three times. Ch 1, sc in next ch 2 sp, ch 1, join with sl st in 3rd ch of beginning ch 4. Finish off.
Rnd 3: Join CB with sc in any sc of Rnd 2. *# Sc in back loop only (BLO) of next ch 1, sc in BLO of next dc, sc in BLO of next ch 1, sc in BLO of next tr, sc in BLO of the first ch of ch 3 sp. Form picot, sc in BLO of 3rd ch of ch 3 sp of Rnd 2, sc in BLO of next tr, sc in BLO of next ch 1, sc in BLO of next dc, sc in BLO of next ch 1. # Sc in next sc. Repeat from * three times, then from # to # once. Finish off.
Background square:
Rnd 1: Using MC, ch 4, join with sl st to form ring. Ch 3, 14 dc in ring. (15 dc)
Rnd 2: Ch 4, (dc in next dc, ch 1) 14 times. Join with sl st in 3rd ch of beginning ch 4. (15 dc, 15 ch 1 sps)
Rnd 3: Ch 3, 2 dc in next ch 1 sp, (dc in next dc, 2 dc in next ch 1 sp) 14 times. Join with sl st in top of beginning ch 3. (45 dc)
Rnd 4: Ch 3, dc in same sp, dc in next 2 dc, (2 dc in next dc, dc in next 2 dc) 14 times. Join wih sl st in top of beginning ch 3. (60 dc)
Note: You will be attaching the overlay on Rnd 5. To do this, hold the overlay in front of the background square with the wrong side of overlay facing the square - in other words, both pieces will have the right sides facing you and the overlay will be on top of the square. Attaching is done as follows: insert hook through picot on Rnd 3 of overlay and into next dc on Rnd 4 of square, work sc through both pieces.
Rnd 5: ch 1, sc in same st, sc in each of next 6 dc, * attach to 1 overlay picot, sc in each of next 11 sc, rep from * three times, attach to last overlay picot, sc in next 4 dc, join with sl st in top of first sc. (60 sc)
Rnd 6: Ch 4, (tr, ch 2, 2 tr) in same st. *# Tr in next sc, dc in next 2 sc, hdc in next 2 sc, sc in next 4 sc, hdc in next 2 sc, dc in next 2 sc, tr in next sc #, (2 tr, ch 2, 2 tr) in next sc. Repeat from * twice, then from # to # once. Join with sl st in top of beginning ch 4.
Rnd 7: Sl st in next tr, sl st into corner ch 2 sp. Ch 3, (2 dc, ch 2, 3 dc) in same sp. *# Sk next dc, V-st in next st, (sk 2 dc, V-st in next dc) 5 times, sk next dc #, (3 dc, ch 2, 3 dc) in corner ch 2 sp. Repeat from * twice, then from # to # once. Join with sl st in top of beginning ch 3. (6 V-st per side)
Rnd 8: Sl st in next dc. Ch 4, dc in same st (V-st made), (3 dc, ch 2, 3 dc) in corner ch 2 sp. *# Sk next dc, V-st in next st, (sk 2 dc, V-st in next V-st) 6 times, sk 2 dc, V-st in next st, sk next dc #, (3 dc, ch 2, 3 dc) in corner ch 2 sp. Repeat from * twice, then from # to # once. Join with sl st in top of beginning ch 3. (8 V-st per side)
Rnd 9: Ch 1, sc in same st, and in each dc and ch 1 sp to corner. * (Sc, ch 2, sc) in corner ch 2 sp. Sc in each dc and ch 1 sp to next corner. Repeat around. Finish off. (32 sc per side)
Rnd 10: Join CA with sl st in any corner ch 2 sp. Ch 3, (dc, ch 2, 2 dc) in same sp. *# Dc in each sc across to next corner #. (2 dc, ch 2, 2 dc) in corner ch 2 sp. Repeat from * twice, then from # to # once. Finish off. (36 dc per side)
Rnd 11: Join CB with sc in any corner ch 2 sp. 2 sc in same sp. *# Sc in each dc across to next corner #, 3 sc in corner ch 2 sp. Repeat from * twice, then from # to # once. Finish off.
وراح نتابع ان شاء الله
Rnd 1: Ch 3, 2 dc in ring, (ch 2, 3dc in ring) four times, ch 2. Join with sl st in top of beginning ch 3.
Rnd 2: Sl st in next dc. Ch 4, (tr, ch 3, tr, ch 1, dc) in same st, * ch 1, sc in next ch 2 sp, ch 1, sk next dc, (dc, ch 1, tr, ch 3, tr, ch 1, dc) in next dc. Repeat from * three times. Ch 1, sc in next ch 2 sp, ch 1, join with sl st in 3rd ch of beginning ch 4. Finish off.
Rnd 3: Join CB with sc in any sc of Rnd 2. *# Sc in back loop only (BLO) of next ch 1, sc in BLO of next dc, sc in BLO of next ch 1, sc in BLO of next tr, sc in BLO of the first ch of ch 3 sp. Form picot, sc in BLO of 3rd ch of ch 3 sp of Rnd 2, sc in BLO of next tr, sc in BLO of next ch 1, sc in BLO of next dc, sc in BLO of next ch 1. # Sc in next sc. Repeat from * three times, then from # to # once. Finish off.
Background square:
Rnd 1: Using MC, ch 4, join with sl st to form ring. Ch 3, 14 dc in ring. (15 dc)
Rnd 2: Ch 4, (dc in next dc, ch 1) 14 times. Join with sl st in 3rd ch of beginning ch 4. (15 dc, 15 ch 1 sps)
Rnd 3: Ch 3, 2 dc in next ch 1 sp, (dc in next dc, 2 dc in next ch 1 sp) 14 times. Join with sl st in top of beginning ch 3. (45 dc)
Rnd 4: Ch 3, dc in same sp, dc in next 2 dc, (2 dc in next dc, dc in next 2 dc) 14 times. Join wih sl st in top of beginning ch 3. (60 dc)
Note: You will be attaching the overlay on Rnd 5. To do this, hold the overlay in front of the background square with the wrong side of overlay facing the square - in other words, both pieces will have the right sides facing you and the overlay will be on top of the square. Attaching is done as follows: insert hook through picot on Rnd 3 of overlay and into next dc on Rnd 4 of square, work sc through both pieces.
Rnd 5: ch 1, sc in same st, sc in each of next 6 dc, * attach to 1 overlay picot, sc in each of next 11 sc, rep from * three times, attach to last overlay picot, sc in next 4 dc, join with sl st in top of first sc. (60 sc)
Rnd 6: Ch 4, (tr, ch 2, 2 tr) in same st. *# Tr in next sc, dc in next 2 sc, hdc in next 2 sc, sc in next 4 sc, hdc in next 2 sc, dc in next 2 sc, tr in next sc #, (2 tr, ch 2, 2 tr) in next sc. Repeat from * twice, then from # to # once. Join with sl st in top of beginning ch 4.
Rnd 7: Sl st in next tr, sl st into corner ch 2 sp. Ch 3, (2 dc, ch 2, 3 dc) in same sp. *# Sk next dc, V-st in next st, (sk 2 dc, V-st in next dc) 5 times, sk next dc #, (3 dc, ch 2, 3 dc) in corner ch 2 sp. Repeat from * twice, then from # to # once. Join with sl st in top of beginning ch 3. (6 V-st per side)
Rnd 8: Sl st in next dc. Ch 4, dc in same st (V-st made), (3 dc, ch 2, 3 dc) in corner ch 2 sp. *# Sk next dc, V-st in next st, (sk 2 dc, V-st in next V-st) 6 times, sk 2 dc, V-st in next st, sk next dc #, (3 dc, ch 2, 3 dc) in corner ch 2 sp. Repeat from * twice, then from # to # once. Join with sl st in top of beginning ch 3. (8 V-st per side)
Rnd 9: Ch 1, sc in same st, and in each dc and ch 1 sp to corner. * (Sc, ch 2, sc) in corner ch 2 sp. Sc in each dc and ch 1 sp to next corner. Repeat around. Finish off. (32 sc per side)
Rnd 10: Join CA with sl st in any corner ch 2 sp. Ch 3, (dc, ch 2, 2 dc) in same sp. *# Dc in each sc across to next corner #. (2 dc, ch 2, 2 dc) in corner ch 2 sp. Repeat from * twice, then from # to # once. Finish off. (36 dc per side)
Rnd 11: Join CB with sc in any corner ch 2 sp. 2 sc in same sp. *# Sc in each dc across to next corner #, 3 sc in corner ch 2 sp. Repeat from * twice, then from # to # once. Finish off.
وراح نتابع ان شاء الله
السلام عليكم ورحمة الله وبركاته
وانا جيت يا أم عزيزان مثل ما وعدتك وراح انزل الوحدات المترجمه من عندي
<<<<<< صمت_الروح بعد ما صارت مشكله بالدخول سجلت مره أخرى باسم ثاني للأسف :44:
=====================================
ترجمة القطعه رقم 7-
6 سلسله تغلق بمنزلقه لتكوين دائره
السطر الاول : 1 سلسله (غرزه حشو فى الدائره ثم 5 سلسله ) يكرر ما بين الاقواس 8 مرات ثم نغلق بمنزلقه فى اول غرزه حشو لتكوين دائره
السطر الثانى : نشتغل غرزه منزلقه حتى نصل الى اللوب التالى
3 سلسله ( 2 بريد – 2 سلسله – 3 بريد ) فى نفس اللوب
ثم غرزه حشو فى اللوب التالى
**( 3 بريد – 2 سلسله – 3 بريد ) فى اللوب التالى ثم حشو فى اللوب التالى
نكرر من ** الى النهايه
ثم نغلق بمنزلقه فى ثالث سلسه من ال 3 سلسله الاولى
:27:
السطر الثالث : غرزه منزلقه حتى نصل لاى فراغ ال 2 سلسله
ثم 1 سلسله * ( غرزه حشو – 3 سلسله – غرزه حشو ) فى فراغ ال 2 سلسله
ثم 4 سلسله ونترك ال 3 بريد التاليه ثم حشو فى غرزه الحشو
ثم نترك ال 3 بريد التاليه ثم 4 سلسله
نكرر من * الى النهايه
ثم نغلق بمنزلقه فى غرزه الحشو الاولى
السطر الرابع : غرزه منزلقه حتة نصل الى فراغ ال 3 سلسله
3 سلسله ( 2 بريد – 2 سلسله – 3 بريد ) فى نفس الفراغ
* حشو فى اللوب ( 4 سلسله ) التالى
5 بريد فى غرزه الحشو
حشو فى اللوب التالى ( 4 سلسله )
( 3 بريد – 2 سلسله – 3 بريد ) فى فراغ ال 3 سلسله
نكرر من ال * 3 مرات
ثم حشو فى اللوب التالى ( 4 سلسله ) ثم 5 بريد فى الحشو
ثم حشو فى فى اللوب( 4 سلسله ) التالى
ثم نغلق بمنزلقه
السطر الخامس : غرزه منزلقه حتى نصل الى فراغ ال 2 سلسله
1 سلسله ** (حشو – 4 سلسله – حشو ) فى الفراغ ( 2 سلسله ) التالى
نترك 3 بريد ثم 5 بريد فى غرزه الحشو
حشو فى ثالث غرزه بريد من المجموعه المكونه من 5 بريد
ثم 5 بريد فى غرزه الحشو التاليه
ثم نكرر من ** الى النهايه ثم نغلق بمنزلقه
السطر السادس : غرزه منزلقه حتى نصل الى فراغ ال 4 سلسله
3 سلسله ( 2 بريد – 2 سلسله – 3 بريد ) فى نفس الفراغ
4 سلسله ثم غرزه حشو فى ثالث غرزه بريد من المجموعه المكونه من 5 بريد التاليه
3 سلسله و غرزه بريد منزلقه فى غرزه الحشو التاليه
ثم 3 سلسله ثم غرزه حشو فى ثالث غرزه بريد من المجموعه المكونه من 5 بريد التاليه
ثم 4 سلسله ** ( 3 بريد – 2 سلسله – 3 بريد ) فى الفراغ -4 سلسله – التاليه
ثم 4 سلسله ثم حشو فى ثالث بريد من المجموعه المكونه من 5 بريد التاليه
ثم 3 سلسله و بريد منزلقه فى غرزه الحشو التاليه
ثم 3 سلسله ثم حشو فى ثالث غرزه بريد فى المجموعه المكونه من 5 بريد التاليه
ثم 4 سلسله
نكرر من ** الى النهايه ثم نغلق بمنزلقه
السطر السابع : غرزه منزلقه حتى نصل الى غرزه البريد التاليه
4 سلسله ** ( بريد – 3 سلسله – بريد ) فى الركن اى فراغ ال 2 سلسله
1 سلسله ثم نترك 1 بريد ثم بريد فى البريد التاليه
ثم 1 سلسله ] (بريد – 1 سلسله – بريد – 1 سلسله ) فى الفراغ التالى [ يكرر 4 مرات
نترك البريد التاليه ثم بريد فى البريد التاليه ثم 1 سلسله
نكرر من ** الى النهايه ونغلق بمنزلقه
السطر الثامن : اذا وجدتى قياس المربع عند يساوى 6 بوصه اذا اشتغلى الاتى
3 سلسله ثم غرزه بريد فى كل غرزه مع مراعاه شغل 5 بريد فى كل ركن
اما اذا كان القياس 6ونصف بوصه فاشتغلى الاتى
1 سلسله ثم غرزه حشو فى كل غرزه مع شغل 3 حشو فى كل ركن
وانا جيت يا أم عزيزان مثل ما وعدتك وراح انزل الوحدات المترجمه من عندي
<<<<<< صمت_الروح بعد ما صارت مشكله بالدخول سجلت مره أخرى باسم ثاني للأسف :44:
=====================================
ترجمة القطعه رقم 7-
6 سلسله تغلق بمنزلقه لتكوين دائره
السطر الاول : 1 سلسله (غرزه حشو فى الدائره ثم 5 سلسله ) يكرر ما بين الاقواس 8 مرات ثم نغلق بمنزلقه فى اول غرزه حشو لتكوين دائره
السطر الثانى : نشتغل غرزه منزلقه حتى نصل الى اللوب التالى
3 سلسله ( 2 بريد – 2 سلسله – 3 بريد ) فى نفس اللوب
ثم غرزه حشو فى اللوب التالى
**( 3 بريد – 2 سلسله – 3 بريد ) فى اللوب التالى ثم حشو فى اللوب التالى
نكرر من ** الى النهايه
ثم نغلق بمنزلقه فى ثالث سلسه من ال 3 سلسله الاولى
:27:
السطر الثالث : غرزه منزلقه حتى نصل لاى فراغ ال 2 سلسله
ثم 1 سلسله * ( غرزه حشو – 3 سلسله – غرزه حشو ) فى فراغ ال 2 سلسله
ثم 4 سلسله ونترك ال 3 بريد التاليه ثم حشو فى غرزه الحشو
ثم نترك ال 3 بريد التاليه ثم 4 سلسله
نكرر من * الى النهايه
ثم نغلق بمنزلقه فى غرزه الحشو الاولى
السطر الرابع : غرزه منزلقه حتة نصل الى فراغ ال 3 سلسله
3 سلسله ( 2 بريد – 2 سلسله – 3 بريد ) فى نفس الفراغ
* حشو فى اللوب ( 4 سلسله ) التالى
5 بريد فى غرزه الحشو
حشو فى اللوب التالى ( 4 سلسله )
( 3 بريد – 2 سلسله – 3 بريد ) فى فراغ ال 3 سلسله
نكرر من ال * 3 مرات
ثم حشو فى اللوب التالى ( 4 سلسله ) ثم 5 بريد فى الحشو
ثم حشو فى فى اللوب( 4 سلسله ) التالى
ثم نغلق بمنزلقه
السطر الخامس : غرزه منزلقه حتى نصل الى فراغ ال 2 سلسله
1 سلسله ** (حشو – 4 سلسله – حشو ) فى الفراغ ( 2 سلسله ) التالى
نترك 3 بريد ثم 5 بريد فى غرزه الحشو
حشو فى ثالث غرزه بريد من المجموعه المكونه من 5 بريد
ثم 5 بريد فى غرزه الحشو التاليه
ثم نكرر من ** الى النهايه ثم نغلق بمنزلقه
السطر السادس : غرزه منزلقه حتى نصل الى فراغ ال 4 سلسله
3 سلسله ( 2 بريد – 2 سلسله – 3 بريد ) فى نفس الفراغ
4 سلسله ثم غرزه حشو فى ثالث غرزه بريد من المجموعه المكونه من 5 بريد التاليه
3 سلسله و غرزه بريد منزلقه فى غرزه الحشو التاليه
ثم 3 سلسله ثم غرزه حشو فى ثالث غرزه بريد من المجموعه المكونه من 5 بريد التاليه
ثم 4 سلسله ** ( 3 بريد – 2 سلسله – 3 بريد ) فى الفراغ -4 سلسله – التاليه
ثم 4 سلسله ثم حشو فى ثالث بريد من المجموعه المكونه من 5 بريد التاليه
ثم 3 سلسله و بريد منزلقه فى غرزه الحشو التاليه
ثم 3 سلسله ثم حشو فى ثالث غرزه بريد فى المجموعه المكونه من 5 بريد التاليه
ثم 4 سلسله
نكرر من ** الى النهايه ثم نغلق بمنزلقه
السطر السابع : غرزه منزلقه حتى نصل الى غرزه البريد التاليه
4 سلسله ** ( بريد – 3 سلسله – بريد ) فى الركن اى فراغ ال 2 سلسله
1 سلسله ثم نترك 1 بريد ثم بريد فى البريد التاليه
ثم 1 سلسله ] (بريد – 1 سلسله – بريد – 1 سلسله ) فى الفراغ التالى [ يكرر 4 مرات
نترك البريد التاليه ثم بريد فى البريد التاليه ثم 1 سلسله
نكرر من ** الى النهايه ونغلق بمنزلقه
السطر الثامن : اذا وجدتى قياس المربع عند يساوى 6 بوصه اذا اشتغلى الاتى
3 سلسله ثم غرزه بريد فى كل غرزه مع مراعاه شغل 5 بريد فى كل ركن
اما اذا كان القياس 6ونصف بوصه فاشتغلى الاتى
1 سلسله ثم غرزه حشو فى كل غرزه مع شغل 3 حشو فى كل ركن
الصفحة الأخيرة
Rnd 1: Ch 6, dc in 6th ch from hook. (Ch 3, dc in same st) twice. Ch 3, join with sl st in 3rd ch of starting ch 6.
Rnd 2: Ch 1, sc in same st, (5 dc in next ch 3 sp, sc in next dc) 3 times. 5 dc in last ch 3 sp, join with sl st in starting sc. (One 5 dc group per side.)
Rnd 3: Ch 6 (counts as dc plus ch 3), (sc in in back loops only of 2nd, 3rd and 4th dc of next 5 dc group), ch 3, dc in next sc.
# * (Ch 3, sc in back loops only of 2nd, 3rd and 4th dc of next 5 dc group). Ch 3, # dc in next sc.
Repeat from * two times, then from # to # once.
Join with sl st in 3rd ch of starting ch 6.
Rnd 4: Ch 1, sc in same st,
# *(5 dc in next ch 3 sp, sc in 2nd sc of next 3 sc group).
5 dc in next ch 3 sp. # Sc in next dc (corner).
Repeat from * two times, then from # to # once.
Join with sl st in starting sc. (Two 5 dc groups per side.)
Rnd 5: Ch 6 (counts as dc plus ch 3), (sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group, ch 3) two times, dc in next sc.
# * (Ch 3, sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group) two times. Ch 3, # dc in next sc.
Repeat from * two times, then from # to # once.
Join with sl st in 3rd ch of starting ch 6.
Rnd 6: Ch 1, sc in same st,
# * (5 dc in next ch 3 sp, sc in 2nd sc of next 3 sc group) two times.
5 dc in next ch 3 sp. # Sc in next dc (corner).
Repeat from * two times, then from # to # once.
Join with sl st in starting sc. (Three 5 dc groups per side.)
Rnd 7: Ch 6 (counts as dc plus ch 3), (sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group, ch 3) three times, dc in next sc.
# * (Ch 3, sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group) three times. Ch 3, # dc in next sc.
Repeat from * two times, then from # to # once.
Join with sl st in 3rd ch of starting ch 6.
Rnd 8: Ch 1, sc in same st,
# * (5 dc in next ch 3 sp, sc in 2nd sc of next 3 sc group) three times.
5 dc in next ch 3 sp. # Sc in next dc (corner).
Repeat from * two times, then from # to # once.
Join with sl st in starting sc. (Four 5 dc groups per side.)
Rnd 9: Ch 6 (counts as dc plus ch 3), (sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group, ch 3) four times, dc in next sc.
# * (Ch 3, sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group) four times. Ch 3, # dc in next sc.
Repeat from * two times, then from # to # once.
Join with sl st in 3rd ch of starting ch 6.
Rnd 10: Ch 1, sc in same st,
# * (5 dc in next ch 3 sp, sc in 2nd sc of next 3 sc group) four times.
5 dc in next ch 3 sp. # Sc in next dc (corner).
Repeat from * two times, then from # to # once.
Join with sl st in starting sc. Finish off. (Five 5 dc groups per side.)
Rnd 11: Join new color with sl st in any corner sc.
Ch 6 (counts as dc plus ch 3), (sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group, ch 3) five times, dc in next sc.
# * (Ch 3, sc in in BLO of 2nd, 3rd and 4th dc of next 5 dc group) five times. Ch 3, # dc in next sc.
Repeat from * two times, then from # to # once.
Join with sl st in 3rd ch of starting ch 6.
Rnd 12: (Ch 3, dc, ch 2, 2 dc) in same st as joining.
# * 3 dc in each ch 3 sp and one dc in each sc across. #
(2dc, ch 2, 2 dc) in corner dc.
Repeat from * two times, then from # to # once.
Join with sl st in top of starting ch 3. Sl st loosely in next dc, sl st into corner ch 2 sp.
Measure work. If square measures 11 inches, use Rnd 13A. If square measures 11 1/2 inches, use Rnd 13B.
Rnd 13A: Ch 3, (dc, ch 2, 2 dc) in ch 2 sp, dc in each dc, * (2 dc, ch 2, 2 dc) in ch 2 sp, dc in each dc. Repeat from * 2 times more. Finish off.
Rnd 13B: Ch 1, 3 sc in ch 2 sp, sc in each dc, * 3 sc in ch 2 sp, sc in each dc. Repeat from * 2 times more. Finish off